Product Overview

This Jarrett boat winch is a dependable top quality product tested by the South Australian Institute of Technology. All winch gearings are supported between sintered bronze bearings. Pinion gears and two way ratchet pawl are case hardened for log wear and all gears are machined not pressed. Complete with Dynex Fibre rope and snap hook.

The Dynex Fibre rope combines good strength retention with good flexibility and dynamic properties. Say goodbye to metal splinters!
Note: This winch is not to be used for lifting.
This winch is recommended for boat (outboards and inboards) size up to 6 metres, aluminium or fibreglass hull boat, where trailer design is unknown or has no keel rollers or side wobbles.
For fast slack cable retrieval, the dual ratio winch 5:1 / 1:1 (2 speed) is recommended, where the 1:1 ratio is used to retrieve slack cable then use the 5:1 to complete the retrieval of the boat.
Winches are not intended (1) for the movement of people and (2) as a load securing device for boats on trailers.

Features
Winch
    Heavy duty 4mm winch body
    Steel bushes
    Machined gears
    Electroplated zinc cobalt, powder coated finish

Dynex Fibre rope
    Exceeds the strength of steel wire ropes of same diameter while floating on water
    Has low elongation properties
    Is extremely flexible, yielding easy handling in all respects
    Has good UV resistance and excellent resistance to chemicals

  • For maximum capacity, winches are to be installed using the four hole bolt down pattern
  • Marine Winches are not intended as a load securing device
  • Winches are not intended for the transportation of people
SKU ANS-WB-F10205
Brand Jarrett
Ratings & Reviews
Be The First To Review This Product!

Help other Marine Depot users shop smarter by writing reviews for products you have purchased.

Write a product review