$41.95
Boat bungs and drains are small fittings with an important role in managing water around decks, wells, cockpit compartments and transoms. Selection depends on thread size, plug style, drain location, material, the surrounding surface and the condition of existing fittings. Use this category to compare bungs, drain outlets, scuppers and related water-management hardware, then check product dimensions carefully before replacing or adding any fitting. Small differences in thread size or diameter can prevent a fitting from seating correctly, so measure carefully and inspect the surrounding hardware before ordering replacements.
Water-management fittings need to match the existing opening, thread and intended use. Direct replacement starts with identifying thread type, diameter, plug style and drain location. For more focused browsing, review boat bungs, boat drains and boat scuppers based on the location and drainage purpose. If the area also needs access for maintenance, inspection ports and deck plates may be worth reviewing at the same time.
For customers comparing boat bungs & drains, the Boat Bungs, Drains and Scuppers Guide is a useful starting point for drainage layout, fitting compatibility and inspection points.
Common materials include nylon, rubber, stainless steel and bronze each suited to different locations and service frequencies. Check product specifications for material, thread standard and any sealing requirements. Inspect the surrounding fittings and backing surface before ordering. If the old fitting has corroded or left a damaged thread, the repair may involve more than a simple plug replacement.
They plug, drain or manage water around cockpit wells, deck surfaces, compartments and transom areas. The right product depends on location, thread type, material and intended drainage purpose.
Check thread type, diameter, plug style and existing fitting dimensions. A slight size difference can prevent correct fitment measure carefully and check product specifications before ordering.
A drain removes water from a compartment or surface through a plug or valve. A scupper directs water away from cockpit or deck areas, often through the hull or transom side.
Damaged fittings should be assessed carefully. Replacement is appropriate where dimensions match and the surrounding material is still in sound condition. Check thread and sealing surface before ordering.
Check thread type, size, material and sealing surface. If the existing fitting has corroded or damaged surrounding material, the repair may involve more than a replacement bung alone.
ABN: 99 423 721 756
