Marine Ring Pulls

Filters
Hide Filters Show Filters
(17 Results)
Cp Bronze Ring Pull Cp Bronze Ring Pull SAW-29748

$16.85

316 Ss 52mm Round Ring Pull 316 Ss 52mm Round Ring Pull SAW-29749

$20.25

316 Ss Round Latch Flush 45mm 316 Ss Round Latch Flush 45mm SAW-29896

$45.95

Latch Flush 62Mm Round S/S Latch Flush 62Mm Round S/S SAW-29899

$56.57 $59.55

$2.98 off RRP of $59.55
Ss 316 Ring Pull 47mm X 38mm Ss 316 Ring Pull 47mm X 38mm SAW-30234

$21.55

Perko Latch Flush Twist C/W Lock White/Chrome Perko Latch Flush Twist C/W Lock White/Chrome BLA-402065

$151.91 $159.90

$7.99 off RRP of $159.90
Latch Flush Twist D Ring 63X63Mm Latch Flush Twist D Ring 63X63Mm BLA-402066

$113.91 $119.90

$5.99 off RRP of $119.90
Perko Latch Flush Twist D Ring C/W Key Lock Hatch Catch With O Rings Perko Latch Flush Twist D Ring C/W Key Lock Hatch Catch With O Rings BLA-402068

$132.91 $139.90

$6.99 off RRP of $139.90
Perko Catch Flush Pull Ring C/P Zinc 57X35Mm Perko Catch Flush Pull Ring C/P Zinc 57X35Mm BLA-402074

$74.01 $77.90

$3.89 off RRP of $77.90
Latch Flush Push Button With Striker Plate Latch Flush Push Button With Striker Plate SAW-29701

$45.60

Flush Latch/Catch -Round Black Chrome T-Handle And Lock Flush Latch/Catch -Round Black Chrome T-Handle And Lock SAW-29990

$86.45 $91.00

$4.55 off RRP of $91.00
RWB Flush Pull W/Spring 75X55 RWB Flush Pull W/Spring 75X55 RWB2811

$11.50

RWB Flush Latch Plast. White RWB Flush Latch Plast. White RWB2895

$16.50

RWB Flush Latch Plast. Black RWB Flush Latch Plast. Black RWB2896

$16.50

RWB Flush Latch 50Mm 316 S/S RWB Flush Latch 50Mm 316 S/S RWB2899

$59.20 $64.00

$4.80 off RRP of $64.00
RWB Flush Latch & Lock S/S RWB Flush Latch & Lock S/S RWB2900

$63.83 $69.00

$5.17 off RRP of $69.00
316 Ss Latch Flush W/Lock 62Mm 316 Ss Latch Flush W/Lock 62Mm SAW-29901

$70.92 $74.65

$3.73 off RRP of $74.65
Out Of Stock Check for Availability

Use marine ring pulls to create low-profile access points for hatches, lockers, floor panels and compact storage compartments.

Choosing marine ring pulls for access panels

Marine ring pulls are useful where a handle needs to sit flat or low against a hatch, locker lid, floor panel or storage compartment. They are often chosen for areas where a raised handle would catch feet, gear or cushions. Before ordering, check the recess depth, fixing pattern, panel thickness and whether the pull needs to lift a light lid or a heavier hatch.

For nearby cabin hardware, compare ring pulls with cabin hardware, marine hinges and boat handles and rails.

Installation details to check

A neat ring-pull installation depends on the cut-out, screw placement and access behind the panel. If replacing an old fitting, measure the outside dimensions and fixing centres before choosing a new one. For new installations, make sure the ring can lift freely and that the backing material is suitable for the expected load.

For wider cabin fit-outs, related cabinet hardware and drink holders and glove boxes may also be useful.

Sizing and finish selection points

  • Match the recess depth to panel thickness so the ring sits flush when closed.
  • Check fixing centre distances and screw size against the existing cut-out where possible.
  • Consider the material and finish so it works with nearby hinges, latches and hardware.
  • Choose a pull rated for the panel weight if it will be used for frequent daily access.

FAQs about marine ring pulls

Where are marine ring pulls commonly used?

They are commonly used on lockers, hatches, deck panels, floor lids and storage compartments where a low-profile pull is preferred.

What should I measure before buying a ring pull?

Measure the outside size, recess or cut-out depth, fixing centres and the thickness of the panel.

Are ring pulls the same as grab handles?

No. Ring pulls are usually for opening panels or lids, while grab handles are intended as handholds or support fittings.

read more