Marine Shower & Galley Pumps
Filters
Show Filters
(19 Results)
$20.43 off RRP of $408.55
$7.99 off RRP of $159.75
$7.49 off RRP of $149.90
$246.91 $259.90
$12.99 off RRP of $259.90
$199.41 $209.90
$10.49 off RRP of $209.90
$313.41 $329.90
$16.49 off RRP of $329.90
$180.41 $189.90
$9.49 off RRP of $189.90
$142.41 $149.90
$7.49 off RRP of $149.90
$3.19 off RRP of $63.90
$12.30 off RRP of $164.00
$9.50 off RRP of $189.95
$9.90 off RRP of $197.95
$246.91 $259.90
$12.99 off RRP of $259.90
Marine shower and galley pumps support sink, shower and water-handling layouts around cabins, cockpits and compact onboard amenities. Match the pump and plumbing parts to the water source, drain route, hose size and access available on the boat.
Planning Shower and Galley Plumbing
Boat shower and galley systems often have short hose runs, tight cupboards and limited service access, so the selected pump and fittings need to suit the space. Check whether you are working with fresh water delivery, grey water drainage or a sink/shower transfer setup before choosing parts.
For sink and compact galley arrangements, the marine galley pumps range may be the more direct starting point. For a broader system refresh, include filters and strainers, marine valves and general marine plumbing supplies in the plan so flow, isolation and servicing are considered together.
Fitment Details That Matter
- Measure hose diameter and check whether fittings are straight, elbowed or barbed.
- Confirm the pump voltage and pressure rating against the existing onboard system.
- Allow access to strainers, filters and valves without removing large panels.
- Keep electrical connections away from wet areas and follow product installation instructions.
Small leaks around showers and sinks can be difficult to trace once cabinetry is back in place. Dry-fit components where practical, check hose clamps and use the correct seal or gasket for the fitting type before returning the system to service.
Shower & Galley Pumps FAQ
What pump do I need for a boat galley or shower?
It depends on whether you need pressure water supply, grey water drainage or transfer pumping. Match the pump type to the job, voltage, hose size and available space.
Should I add valves to a shower or galley system?
Valves can make servicing easier by isolating sections of plumbing, but the right layout depends on the boat and fitting arrangement.
Why does a boat sink or shower pump lose flow?
Common causes include blocked filters, air leaks, kinked hose, worn pump parts or incorrect pump sizing. Check the full plumbing path before replacing parts.
read more
