Non Skid Deck Tape & Tread Tape

Non skid deck tape adds grip to steps, cockpit edges, boarding areas and walkways where a simple tread strip is preferred. Choose tape by surface type, width, texture, exposure and the amount of foot traffic around the area.

Non skid deck tape for boat walkways

Non skid deck tape is a practical option for adding grip to selected areas of a boat without repainting the whole surface. It can suit steps, boarding points, cockpit edges, companionway areas and other small zones where footwear or wet conditions can make movement less stable.

Before applying tape, clean and dry the surface with suitable boat cleaners. If a broader tread solution is needed, compare non skid deck pads. Around boarding areas, it may also be worth checking related boat ladders and steps.

Installation considerations

Measure the width and length needed before cutting or applying.
Check whether the surface is smooth, clean and compatible.
Consider edge exposure, drainage and regular foot traffic.
Follow product directions for application temperature and curing time.

Non skid tape is not a substitute for proper deck maintenance, but it can be a useful targeted upgrade in high-use areas.

Frequently Asked Questions

Where can non skid deck tape be used?

It can be used on suitable clean surfaces such as steps, walkways and cockpit areas, depending on the product and surface condition.

How do I prepare the surface for deck tape?

Clean and dry the area, remove loose material and follow the product instructions for surface preparation and application.

Is non skid tape the same as tread pads?

No. Tape is usually applied in strips, while tread pads are separate pad-style grip products. The better choice depends on the area and desired coverage.