TruDesign Vented Loops With Solenoid Designed and made in New Zealand TruDesign Vented Loops with Solenoid are the superior composite siphon break solutions for marine applications Vented Loops prevent water siphoning from underwater skin fittings back into a vessel and thereby guard against accidental flooding and sinking Vented Loops are used predominantly in toilet to overboard applications toilet inlet applications and holding tank to overboard applications They can also be used in genset or small engine inlet cooling water systems A Solenoid controlled Vented Loop allows the vent to be switched to fully closed Used in electric toilet applications where the inlet flush button is synchronised to to turn the vented loop solenoid off This enables a full flow of flush water without air being admitted This eliminates air entering the system as occurs with a standard vented loop The solenoid used is normally open requiring power only to close the valve Vented Loops are moulded from a high strength highly inert Polysulfone core overmoulded in Polyproplene Features Moulded from a high strength high inert Polysulfone core overmoulded in Polypropylene Robust polymer covered solenoid Long life in the marine environment Diaphragm valve Faster breaking of siphon due to larger flow rate available Female threaded Solenoid Valve No brass bronze adapter to corrode Constant internal diameter No reduction in flow Self contained mounting 3 screw mounting posts give secure and easy installation Chemical resistant Impervious to waste water and common toilet cleaning products UV resistant These fittings will not break down with ultraviolet light or discolour from the sun High quality surface finish Will not discolour with green film as similar bronze fittings do Large operating temperature range Suitable for all marine environments from 20 BUY IN ONLY ITEM CONTACT CUSTOMER SERVICE FOR FURTHER INFORMATION ON AVAILABILITY AND LEAD TIME

SKU	BLA-139076
Brand	TruDesign