Marine Plumbing Supplies

Marine Plumbing Supplies

Filters
Hide Filters Show Filters
(209 Results)
$3.90 off RRP of $77.95
$7.28 off RRP of $145.55
$5.80 off RRP of $115.95
$34.45 off RRP of $689.05
Made In Italy
$24.25 off RRP of $484.95
Made In Italy
$20.85 off RRP of $417.10
Made In Italy
$25.41 off RRP of $508.15
Made In Italy
$24.05 off RRP of $481.00
Made In Italy
$35.23 off RRP of $704.55
Made In Italy
$83.20 off RRP of $2,773.40
Made In Italy
$33.06 off RRP of $661.25
Made In Italy
$78.06 off RRP of $2,601.85
Made In Italy
$85.11 off RRP of $2,837.10
Made In Italy
$15.28 off RRP of $305.70
Made In Italy
$17.08 off RRP of $341.65
Made In Italy
$17.94 off RRP of $358.85
Made In Italy
$17.55 off RRP of $351.00
Made In Italy
$18.88 off RRP of $377.70
Made In Italy
$20.67 off RRP of $413.40
$6.88 off RRP of $137.65
$6.88 off RRP of $137.65
$4.20 off RRP of $83.95
$23.24 off RRP of $464.80
$20.43 off RRP of $408.55
$7.99 off RRP of $159.75

Choosing Marine Plumbing Supplies

Marine plumbing supplies sit behind many everyday systems on a boat, from freshwater delivery and galley drains to waste lines, pump connections and through-hull plumbing. The right category choice usually starts with the job being done: repairing a leak, replacing a tired fitting, adding a valve, tidying a pump run or refreshing a section of hose and fittings during a larger service.

For general plumbing work, match every part to the system it will be used in. Freshwater, saltwater, waste, fuel-adjacent and drainage applications can have different material, size and access requirements. Check the existing hose internal diameter, thread type, barb size and available space before ordering, especially where fittings sit behind panels or under lockers. Small differences in fitting size can create frustrating leaks or make a service job harder than it needs to be.

Plan the system before replacing parts

A good marine plumbing repair is usually planned around the whole run, not just the single failed part. Review related marine valves, skin fittings, filters and strainers and marine pumps when checking a system. If one part has become brittle or corroded, nearby hose clamps, seals, elbows or adaptors may also be due for attention.

Keep access in mind. Parts that may need regular inspection should be installed where they can be reached without dismantling half the boat. For bilge, galley and toilet plumbing, clear routing also helps with future cleaning and fault finding.

Common marine plumbing considerations

  • Confirm hose size, fitting size and thread type before replacing a component.
  • Use fittings that suit the fluid, temperature and pressure of the system.
  • Allow enough access for inspection, cleaning and future replacement.
  • Check related seals, clamps and hose condition while the system is open.

For specific marine plumbing jobs, browse sections including marine toilet systems, shower and galley plumbing, and related hose, fitting and filter ranges.



FAQs

What should I check before ordering marine plumbing supplies?

Measure the hose, thread or fitting being replaced and confirm the system type, such as freshwater, waste, bilge or drainage. Photos and existing part markings can help avoid selecting the wrong size.

Can one fitting be used across every boat plumbing system?

Not always. Material, pressure, temperature and fluid compatibility can vary, so a fitting that suits a freshwater line may not be suitable for every waste, pump or through-hull application.

Should I replace nearby parts during a plumbing repair?

It is often worth inspecting clamps, seals, hose ends and neighbouring fittings while the system is open. Replace only what is worn or unsuitable, but avoid reinstalling obviously tired parts.



read more