
$48.90
The reverse mount trim tab has a short ram, perfect where space is limited on the transoms or reverse if there is a swim platform.
The actuator can be installed on the underside of a swim platform and does not impede tab movement (as seen in Diagram A).
Lenco Electric Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small boat or a large yacht.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Plates 12 gauge - 304G stainless steal and 1/8" diameter hinge pin.
Equipped with a fast response electric actuators for precise control.
Fully submersible with all Plug and Play Deutsch connections.
Compliance: CE Certified .
Kit Includes:
2 x 12 gauge stainless steel trim tab blades L 9" x W 12" with welded on lower mount bracket 5/16" hole.
2 x 101XDS actuators with 6' lead and Deutsch plugs.
2 x 20' actuator extension wiring harnesses.
2 x Upper mounting bracket with gland seal.
All necessary stainless steel mounting hardware.
Part No. | 55498 |
Length | 9 inch (229mm) |
Width | 12 inch (305mm) |
Series | Reverse Mount |
Switch | Not Included |
Volts | 12V |
Hinge Height | 54mm |
Min. Transom Height | 300mm |
Approx Boat Length | 5Mtr - 8Mtr |
Finish | Electro Polished |
Note | Switch kits sold separately. 12 Volt only. |
SKU | SAW-55498 |
Brand | Lenco |
Help other Marine Depot users shop smarter by writing reviews for products you have purchased.
Part No: SAW-55498
RRP of $1,443.45
The reverse mount trim tab has a short ram, perfect where space is limited on the transoms or reverse if there is a swim platform.
The actuator can be installed on the underside of a swim platform and does not impede tab movement (as seen in Diagram A).
Lenco Electric Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small boat or a large yacht.
The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.
Plates 12 gauge - 304G stainless steal and 1/8" diameter hinge pin.
Equipped with a fast response electric actuators for precise control.
Fully submersible with all Plug and Play Deutsch connections.
Compliance: CE Certified .
Kit Includes:
2 x 12 gauge stainless steel trim tab blades L 9" x W 12" with welded on lower mount bracket 5/16" hole.
2 x 101XDS actuators with 6' lead and Deutsch plugs.
2 x 20' actuator extension wiring harnesses.
2 x Upper mounting bracket with gland seal.
All necessary stainless steel mounting hardware.
Part No. | 55498 |
Length | 9 inch (229mm) |
Width | 12 inch (305mm) |
Series | Reverse Mount |
Switch | Not Included |
Volts | 12V |
Hinge Height | 54mm |
Min. Transom Height | 300mm |
Approx Boat Length | 5Mtr - 8Mtr |
Finish | Electro Polished |
Note | Switch kits sold separately. 12 Volt only. |
SKU | SAW-55498 |
Brand | Lenco |
Help other Marine Depot users shop smarter by writing reviews for products you have purchased.
Stock is warehoused in Brisbane, Sydney, Melbourne and will be dispatched based on warehouse availability and delivery location.