$104.41 $109.90
$5.49 off RRP of $109.90
Marine Engine Control Cables
Filters
Show Filters
(182 Results)
$113.91 $119.90
$5.99 off RRP of $119.90
$123.41 $129.90
$6.49 off RRP of $129.90
$123.41 $129.90
$6.49 off RRP of $129.90
$113.91 $119.90
$5.99 off RRP of $119.90
$123.41 $129.90
$6.49 off RRP of $129.90
$132.91 $139.90
$6.99 off RRP of $139.90
$132.91 $139.90
$6.99 off RRP of $139.90
$142.41 $149.90
$7.49 off RRP of $149.90
$189.91 $199.90
$9.99 off RRP of $199.90
$94.91 $99.90
$4.99 off RRP of $99.90
$104.41 $109.90
$5.49 off RRP of $109.90
$113.91 $119.90
$5.99 off RRP of $119.90
$113.91 $119.90
$5.99 off RRP of $119.90
$113.91 $119.90
$5.99 off RRP of $119.90
$113.91 $119.90
$5.99 off RRP of $119.90
$123.41 $129.90
$6.49 off RRP of $129.90
$123.41 $129.90
$6.49 off RRP of $129.90
$123.41 $129.90
$6.49 off RRP of $129.90
$123.41 $129.90
$6.49 off RRP of $129.90
$132.91 $139.90
$6.99 off RRP of $139.90
$6.99 off RRP of $139.90
$89.21 $93.90
$4.69 off RRP of $93.90
$104.41 $109.90
$5.49 off RRP of $109.90
$113.91 $119.90
$5.99 off RRP of $119.90
$113.91 $119.90
$5.99 off RRP of $119.90
$113.91 $119.90
$5.99 off RRP of $119.90
$132.91 $139.90
$6.99 off RRP of $139.90
$132.91 $139.90
$6.99 off RRP of $139.90
$151.91 $159.90
$7.99 off RRP of $159.90
$161.41 $169.90
$8.49 off RRP of $169.90
$170.91 $179.90
$8.99 off RRP of $179.90
Marine engine control cables connect helm controls to throttle and shift systems. Check length, end fittings, routing and control compatibility before ordering.
Marine engine control cables for throttle and shift operation
Marine engine control cables connect helm controls to the engine so throttle and gear selection can move smoothly through the control system. Worn, stiff or poorly routed cables can make operation harder and may point to the need for inspection, adjustment or replacement. Selection depends on cable length, end fittings, control type, engine type and the path the cable takes through the boat.
Use this category for control cable replacement and related engine control jobs. If you need the wider control system, compare engine controls and steering. For small hardware and control components, review engine control parts and accessories. For steering-specific work, cable steering is a separate area.
Measure carefully before replacing a cable. The route should avoid tight bends, hot surfaces and sharp edges, while leaving enough movement for engine tilt and steering. If the existing cable is damaged or corroded, inspect surrounding clamps, grommets and controls at the same time.
Cable replacement checks
- Confirm the existing cable type and end fitting style.
- Measure length using the correct method for your control system.
- Check the routing path before ordering.
- Allow for engine movement, tilt and steering travel.
- Inspect controls and linkages if the old cable feels stiff or uneven.
FAQs about Marine Engine Control Cables
How do I know what engine control cable length I need?
Use the measurement method recommended for your control system or existing cable type. Allow for routing and engine movement rather than measuring only in a straight line.
What are signs a control cable may need attention?
Heavy movement, sticking, frayed outer casing, corrosion, damaged ends or uneven throttle and shift feel can indicate the cable or control system needs inspection.
Are steering cables and engine control cables the same?
No. Steering cables are used for steering systems, while engine control cables operate throttle and shift controls.
read more
