Marine Engine Blowers

Filters

Hide Filters Show Filters

(56 Results)

Marine Town Vent Cowl S/S C/W Tail T/S 75Mm Hose Marine Town Vent Cowl S/S C/W Tail T/S 75Mm Hose BLA-175328

$76.86 $80.90

$4.04 off RRP of $80.90

Marine Town Vent Butterfly S/S 102Mm Marine Town Vent Butterfly S/S 102Mm BLA-175348

$31.90

Vent Mushroom Plastic White 148Mm Od Vent Mushroom Plastic White 148Mm Od BLA-175354

$55.96 $58.90

$2.94 off RRP of $58.90

Vent Dorade Plastic 194X149Mm Vent Dorade Plastic 194X149Mm BLA-175360

$19.90

Vent Cowl Low Line Pvc White 63Mm Id Vent Cowl Low Line Pvc White 63Mm Id BLA-175404

$71.16 $74.90

$3.74 off RRP of $74.90

Attwood Blower Bilge Turbo In Line 75Mm Hose Attwood Blower Bilge Turbo In Line 75Mm Hose BLA-176010

$57.86 $60.90

$3.04 off RRP of $60.90

TMC Blower Bilge In Line 12V 75Mm Hose TMC Blower Bilge In Line 12V 75Mm Hose BLA-176014

$53.11 $55.90

$2.79 off RRP of $55.90

Easterner Vent Louvre Plastic White 86X86Mm Easterner Vent Louvre Plastic White 86X86Mm BLA-176028

$6.90

SPX Johnson Pump Blower Bilge Air V3-280 Flange Mount 12V SPX Johnson Pump Blower Bilge Air V3-280 Flange Mount 12V BLA-176060

$180.41 $189.90

$9.49 off RRP of $189.90

SPX Bilge Blower Extra Heavy Duty AirV 4-550 Flange Mount 12V SPX Bilge Blower Extra Heavy Duty AirV 4-550 Flange Mount 12V BLA-176064

$408.41 $429.90

$21.49 off RRP of $429.90

SPX Johnson Pump Bilge Blower AirV 4-550 Extra Heavy Duty Flex Mount 12V SPX Johnson Pump Bilge Blower AirV 4-550 Extra Heavy Duty Flex Mount 12V BLA-176074

$465.41 $489.90

$24.49 off RRP of $489.90

Dometic Clevis Fork 1/4 T/S 30 Series Cable Dometic Clevis Fork 1/4 T/S 30 Series Cable BLA-305002

$80.66 $84.90

$4.24 off RRP of $84.90

Dometic Ball Joint 1/4 T/S 30 Series Cable Dometic Ball Joint 1/4 T/S 30 Series Cable BLA-305006

$54.06 $56.90

$2.84 off RRP of $56.90

Dometic Connection Kit Universal 30 Series Dometic Connection Kit Universal 30 Series BLA-305014

$161.41 $169.90

$8.49 off RRP of $169.90

Dometic Connection Kit Mercruiser 30 Series Dometic Connection Kit Mercruiser 30 Series BLA-305018

$81.61 $85.90

$4.29 off RRP of $85.90

free shipping*

NHK MEC Control Ke Electronic Single W/O Ptt NHK MEC Control Ke Electronic Single W/O Ptt BLA-305700

$1,289.13 $1,329.00

$39.87 off RRP of $1,329.00

free shipping*

NHK MEC Control Ke Electronic Single W/O Ptt Sst NHK MEC Control Ke Electronic Single W/O Ptt Sst BLA-305701

$1,357.03 $1,399.00

$41.97 off RRP of $1,399.00

Lewmar Std Pawl (Small) Lewmar Std Pawl (Small) BLA-430600

$17.90

Lewmar Std Pawl (Large) Lewmar Std Pawl (Large) BLA-430602

$21.90

Round Air Ventilator Suits 100mm Tube Round Air Ventilator Suits 100mm Tube SAW-30574

$36.30

Flange 65mm White With Vent Flange 65mm White With Vent SAW-30575

$28.80

Blower-Bilge TMC 75mm 12v Blower-Bilge TMC 75mm 12v RWB542

$68.45 $74.00

$5.55 off RRP of $74.00

free shipping*

NHK MEC Control Ke Electronic Single W Ptt NHK MEC Control Ke Electronic Single W Ptt BLA-305702

$1,327.93 $1,369.00

$41.07 off RRP of $1,369.00

Lewmar Super Pawl Small Winch Spare Part Boat Marine Lewmar Super Pawl Small Winch Spare Part Boat Marine BLA-430606

$113.91

Marine engine blowers help ventilate enclosed engine compartments by moving air through ducting to clear fumes and maintain airflow before and during engine operation. Choosing the right blower depends on your engine-compartment layout, duct diameter, mounting position and how the unit can be wired and accessed for ongoing servicing. Pre-start ventilation is standard practice on petrol inboard and stern-drive vessels running the blower for several minutes before starting the engine is a basic part of engine-bay management on these setups. This range covers inline and axial blower options for enclosed marine engine spaces.

When Marine Engine Blowers Are Used

Engine blowers are primarily used in enclosed compartments housing petrol inboard or stern-drive engines, where fumes can accumulate when the bilge is not naturally ventilated. Pre-start ventilation running the blower for several minutes before starting the engine is standard practice on many petrol-engine vessels as part of safe engine-bay management. Diesel-engine vessels and outboard setups generally have different ventilation requirements; check your engine manual for guidance on what applies to your boat.

In addition to pre-start use, blowers can be run during operation to maintain airflow in the engine space. Ducting arrangement, intake and outlet positioning, and the path of airflow through the compartment all affect how well a blower performs in a given installation.

Blower Style and Airflow Considerations

The two common formats are inline blowers, which mount within the duct run and move air along the duct path, and axial blowers, which mount at a compartment opening and push or pull air directly. Inline units suit installations where the blower needs to be tucked away from the engine and the duct does most of the work. Axial units are more direct and typically easier to service, but require accessible mounting space at the compartment face or hatch.

Duct diameter is the critical sizing check the blower should match the duct diameter of your existing or planned system. Tight bends, long runs and crushed duct sections all reduce airflow, so the duct layout should be as direct as practical. For broader engine accessory reviews and related parts, browse marine engine accessories.

Ducting, Switches and Installation Notes

Blower wiring should be kept away from fuel lines, hot exhaust surfaces and bilge water where possible. Most installations use a dedicated switch at the helm, allowing the operator to run the blower before starting the engine without leaving the helm position. Check the product specifications for voltage, current draw and connection requirements before wiring.

Where blower wiring or fuel-adjacent installation is involved, use a qualified marine electrician. Product specifications and manufacturer installation instructions should be followed for the specific model rather than assuming all blowers install identically. Where duct size, mounting position or wiring access is unclear, confirm the measurements and connection requirements before ordering.

For related engine bay servicing, also consider marine engine strainers, marine exhaust outlets, marine engine sound insulation and marine spark plugs.

Marine Engine Blowers FAQ

What does a marine engine blower do?

A marine engine blower moves air through an enclosed engine compartment to clear fuel vapour and maintain airflow. Pre-start ventilation using a blower is standard practice on many petrol inboard and stern-drive vessels before starting the engine.

How do I choose the right marine engine blower?

Match the blower to your duct diameter, compartment layout and mounting position. Check the product specifications for voltage, current draw and duct connection size, and follow the manufacturer installation instructions for the specific model.

Where should a marine engine blower be installed?

Position and installation depend on your vessel design, engine compartment layout and the product specifications. Inline units mount within the duct run; axial units mount at a compartment opening. Use a qualified installer where electrical work or fuel-adjacent mounting is required.

Do engine blowers need ducting?

Inline blowers require ducting as part of the airflow path. Axial blowers may work directly at a compartment opening depending on the design. Check the product listing and your vessel layout before choosing a format.

How often should engine bay ventilation be checked?

Inspect the blower, ducting, connections and switch operation as part of regular engine servicing. Look for kinked or damaged duct sections, loose connections and any signs of corrosion on electrical fittings.